Troy Lee Designs D4 Stealth karbon MIPS Fullface sisak

Extremely safe and light

The full-face helmet D4 Carbon by Troy Lee Designs can confidently carry the title Champion. Inspired by the Daytona, D2 and D3 collections, the D4 takes it all to the next level.

highlights

• TeXtreme® carbon fiber outer shell
• Equipped with the MIPS® Brain Protection System - a low-friction layer integrated into the helmet that reduces rotational movement on the brain in the event of an angled impact on the head
• Ventilation channels and head pads work in unison to promote airflow through the helmet
• Lightweight titanium double D-rings and hardware
• Extended EPS layer on the lower edge of the helmet to prevent collarbone injuries
• Innovative tear-off helmet shield screws
• Molded polycarbonate around vents and exposed EPS increase strength and durability
• Washable XT2 3D cheek pads and X-Static/XT2 head pads with quick release ensure an optimal fit
• Includes plush helmet bag

specification

Technologies used

In this chapter we explain the technologies that the manufacturer uses in this product.

MIPS
The MIPS® safety system was developed to provide additional protection for helmets in numerous accidents. In certain impact situations, the MIPS system can reduce dangerous forces that might otherwise be transmitted to the helmet wearer's head.

1. Conventional helmets are designed and tested for a straight impact. In most cases, however, the impact is at an angle, which can cause rotational movements for the head.

2. This rotational movement can cause brain injury.

3. The low-friction shell is designed to help reduce rotational movement of the head in certain cases of angled impact.

Straight impact - oblique impact

The brain is typically more sensitive to rotational movement than linear movement because it has a shear strength similar to that of water or gel. When rotational movement causes different parts of the brain to move at different times, the tissues can be stretched, causing concussions or other brain injuries.

Rotational motion is a common cause of concussion and more serious brain injury from an oblique impact to the head. The MIPS system consists of a low-friction shell that is fixed inside the helmet. The low-friction shell is designed to slide slightly inside the helmet in the event of an accident, allowing forces to be directed away from the head. It is said to help reduce the risk of brain injuries.

Most conventional helmets are designed for a straight impact, but in most cases the impact is at an angle. The low-friction shell can reduce the rotational forces of an oblique impact.

Security system with the brain as a model

Unlike conventional helmets, which are primarily designed and tested for a straight impact, the low-friction shell of the MIPS system mimics the brain's own protection system against rotational movement. The cerebrospinal fluid is our natural defense system that allows the brain to move offset to the skull.

scope of delivery

• 1 x Troy Lee Designs D4 Stealth Carbon MIPS full face helmet (see item description for details)
• 1 x helmet bag

Extremely safe and light

The full-face helmet D4 Carbon by Troy Lee Designs can confidently carry the title Champion. Inspired by the Daytona, D2 and D3 collections, the D4 takes it all to the next level.

highlights

• TeXtreme® carbon fiber outer shell
• Equipped with the MIPS® Brain Protection System - a low-friction layer integrated into the helmet that reduces rotational movement on the brain in the event of an angled impact on the head
• Ventilation channels and head pads work in unison to promote airflow through the helmet
• Lightweight titanium double D-rings and hardware
• Extended EPS layer on the lower edge of the helmet to prevent collarbone injuries
• Innovative tear-off helmet shield screws
• Molded polycarbonate around vents and exposed EPS increase strength and durability
• Washable XT2 3D cheek pads and X-Static/XT2 head pads with quick release ensure an optimal fit
• Includes plush helmet bag

specification

Technologies used

In this chapter we explain the technologies that the manufacturer uses in this product.

MIPS
The MIPS® safety system was developed to provide additional protection for helmets in numerous accidents. In certain impact situations, the MIPS system can reduce dangerous forces that might otherwise be transmitted to the helmet wearer's head.

1. Conventional helmets are designed and tested for a straight impact. In most cases, however, the impact is at an angle, which can cause rotational movements for the head.

2. This rotational movement can cause brain injury.

3. The low-friction shell is designed to help reduce rotational movement of the head in certain cases of angled impact.

Straight impact - oblique impact

The brain is typically more sensitive to rotational movement than linear movement because it has a shear strength similar to that of water or gel. When rotational movement causes different parts of the brain to move at different times, the tissues can be stretched, causing concussions or other brain injuries.

Rotational motion is a common cause of concussion and more serious brain injury from an oblique impact to the head. The MIPS system consists of a low-friction shell that is fixed inside the helmet. The low-friction shell is designed to slide slightly inside the helmet in the event of an accident, allowing forces to be directed away from the head. It is said to help reduce the risk of brain injuries.

Most conventional helmets are designed for a straight impact, but in most cases the impact is at an angle. The low-friction shell can reduce the rotational forces of an oblique impact.

Security system with the brain as a model

Unlike conventional helmets, which are primarily designed and tested for a straight impact, the low-friction shell of the MIPS system mimics the brain's own protection system against rotational movement. The cerebrospinal fluid is our natural defense system that allows the brain to move offset to the skull.

scope of delivery

• 1 x Troy Lee Designs D4 Stealth Carbon MIPS full face helmet (see item description for details)
• 1 x helmet bag

Extremely safe and light

The full-face helmet D4 Carbon by Troy Lee Designs can confidently carry the title Champion. Inspired by the Daytona, D2 and D3 collections, the D4 takes it all to the next level.

highlights

• TeXtreme® carbon fiber outer shell
• Equipped with the MIPS® Brain Protection System - a low-friction layer integrated into the helmet that reduces rotational movement on the brain in the event of an angled impact on the head
• Ventilation channels and head pads work in unison to promote airflow through the helmet
• Lightweight titanium double D-rings and hardware
• Extended EPS layer on the lower edge of the helmet to prevent collarbone injuries
• Innovative tear-off helmet shield screws
• Molded polycarbonate around vents and exposed EPS increase strength and durability
• Washable XT2 3D cheek pads and X-Static/XT2 head pads with quick release ensure an optimal fit
• Includes plush helmet bag

specification

Technologies used

In this chapter we explain the technologies that the manufacturer uses in this product.

MIPS
The MIPS® safety system was developed to provide additional protection for helmets in numerous accidents. In certain impact situations, the MIPS system can reduce dangerous forces that might otherwise be transmitted to the helmet wearer's head.

1. Conventional helmets are designed and tested for a straight impact. In most cases, however, the impact is at an angle, which can cause rotational movements for the head.

2. This rotational movement can cause brain injury.

3. The low-friction shell is designed to help reduce rotational movement of the head in certain cases of angled impact.

Straight impact - oblique impact

The brain is typically more sensitive to rotational movement than linear movement because it has a shear strength similar to that of water or gel. When rotational movement causes different parts of the brain to move at different times, the tissues can be stretched, causing concussions or other brain injuries.

Rotational motion is a common cause of concussion and more serious brain injury from an oblique impact to the head. The MIPS system consists of a low-friction shell that is fixed inside the helmet. The low-friction shell is designed to slide slightly inside the helmet in the event of an accident, allowing forces to be directed away from the head. It is said to help reduce the risk of brain injuries.

Most conventional helmets are designed for a straight impact, but in most cases the impact is at an angle. The low-friction shell can reduce the rotational forces of an oblique impact.

Security system with the brain as a model

Unlike conventional helmets, which are primarily designed and tested for a straight impact, the low-friction shell of the MIPS system mimics the brain's own protection system against rotational movement. The cerebrospinal fluid is our natural defense system that allows the brain to move offset to the skull.

scope of delivery

• 1 x Troy Lee Designs D4 Stealth Carbon MIPS full face helmet (see item description for details)
• 1 x helmet bag

Extremely safe and light

The full-face helmet D4 Carbon by Troy Lee Designs can confidently carry the title Champion. Inspired by the Daytona, D2 and D3 collections, the D4 takes it all to the next level.

highlights

• TeXtreme® carbon fiber outer shell
• Equipped with the MIPS® Brain Protection System - a low-friction layer integrated into the helmet that reduces rotational movement on the brain in the event of an angled impact on the head
• Ventilation channels and head pads work in unison to promote airflow through the helmet
• Lightweight titanium double D-rings and hardware
• Extended EPS layer on the lower edge of the helmet to prevent collarbone injuries
• Innovative tear-off helmet shield screws
• Molded polycarbonate around vents and exposed EPS increase strength and durability
• Washable XT2 3D cheek pads and X-Static/XT2 head pads with quick release ensure an optimal fit
• Includes plush helmet bag

specification

Technologies used

In this chapter we explain the technologies that the manufacturer uses in this product.

MIPS
The MIPS® safety system was developed to provide additional protection for helmets in numerous accidents. In certain impact situations, the MIPS system can reduce dangerous forces that might otherwise be transmitted to the helmet wearer's head.

1. Conventional helmets are designed and tested for a straight impact. In most cases, however, the impact is at an angle, which can cause rotational movements for the head.

2. This rotational movement can cause brain injury.

3. The low-friction shell is designed to help reduce rotational movement of the head in certain cases of angled impact.

Straight impact - oblique impact

The brain is typically more sensitive to rotational movement than linear movement because it has a shear strength similar to that of water or gel. When rotational movement causes different parts of the brain to move at different times, the tissues can be stretched, causing concussions or other brain injuries.

Rotational motion is a common cause of concussion and more serious brain injury from an oblique impact to the head. The MIPS system consists of a low-friction shell that is fixed inside the helmet. The low-friction shell is designed to slide slightly inside the helmet in the event of an accident, allowing forces to be directed away from the head. It is said to help reduce the risk of brain injuries.

Most conventional helmets are designed for a straight impact, but in most cases the impact is at an angle. The low-friction shell can reduce the rotational forces of an oblique impact.

Security system with the brain as a model

Unlike conventional helmets, which are primarily designed and tested for a straight impact, the low-friction shell of the MIPS system mimics the brain's own protection system against rotational movement. The cerebrospinal fluid is our natural defense system that allows the brain to move offset to the skull.

scope of delivery

• 1 x Troy Lee Designs D4 Stealth Carbon MIPS full face helmet (see item description for details)
• 1 x helmet bag

Extremely safe and light

The full-face helmet D4 Carbon by Troy Lee Designs can confidently carry the title Champion. Inspired by the Daytona, D2 and D3 collections, the D4 takes it all to the next level.

highlights

• TeXtreme® carbon fiber outer shell
• Equipped with the MIPS® Brain Protection System - a low-friction layer integrated into the helmet that reduces rotational movement on the brain in the event of an angled impact on the head
• Ventilation channels and head pads work in unison to promote airflow through the helmet
• Lightweight titanium double D-rings and hardware
• Extended EPS layer on the lower edge of the helmet to prevent collarbone injuries
• Innovative tear-off helmet shield screws
• Molded polycarbonate around vents and exposed EPS increase strength and durability
• Washable XT2 3D cheek pads and X-Static/XT2 head pads with quick release ensure an optimal fit
• Includes plush helmet bag

specification

Technologies used

In this chapter we explain the technologies that the manufacturer uses in this product.

MIPS
The MIPS® safety system was developed to provide additional protection for helmets in numerous accidents. In certain impact situations, the MIPS system can reduce dangerous forces that might otherwise be transmitted to the helmet wearer's head.

1. Conventional helmets are designed and tested for a straight impact. In most cases, however, the impact is at an angle, which can cause rotational movements for the head.

2. This rotational movement can cause brain injury.

3. The low-friction shell is designed to help reduce rotational movement of the head in certain cases of angled impact.

Straight impact - oblique impact

The brain is typically more sensitive to rotational movement than linear movement because it has a shear strength similar to that of water or gel. When rotational movement causes different parts of the brain to move at different times, the tissues can be stretched, causing concussions or other brain injuries.

Rotational motion is a common cause of concussion and more serious brain injury from an oblique impact to the head. The MIPS system consists of a low-friction shell that is fixed inside the helmet. The low-friction shell is designed to slide slightly inside the helmet in the event of an accident, allowing forces to be directed away from the head. It is said to help reduce the risk of brain injuries.

Most conventional helmets are designed for a straight impact, but in most cases the impact is at an angle. The low-friction shell can reduce the rotational forces of an oblique impact.

Security system with the brain as a model

Unlike conventional helmets, which are primarily designed and tested for a straight impact, the low-friction shell of the MIPS system mimics the brain's own protection system against rotational movement. The cerebrospinal fluid is our natural defense system that allows the brain to move offset to the skull.

scope of delivery

• 1 x Troy Lee Designs D4 Stealth Carbon MIPS full face helmet (see item description for details)
• 1 x helmet bag